Call Sales Rep: 1-888-314-1680
2016 TAYLOR TXH350L Image
Stock Number: EQU020041
Make: TAYLOR
Model: TXH350L
Year: 2016
2016 TAYLOR TXH350L Details
2012 Manitou 48" Forks Image
Stock Number: ATT203
Make: Manitou
Model: 48" Forks
Year: 2012
2012 Manitou 48" Forks Details
2011 JLG Truss Jib 12' Image
Stock Number: ATT159
Make: JLG
Model: Truss Jib 12'
Year: 2011
2011 JLG Truss Jib 12' Details
2010 Capacity TJ5000 DOT Image
Stock Number: EQU012898
Make: Capacity
Model: TJ5000 DOT
Year: 2010
2010 Capacity TJ5000 DOT Details
2016 JLG 450AJ Image
Stock Number: 300714
Make: JLG
Model: 450AJ
Year: 2016
2016 JLG 450AJ Details
2015 FrostFighter IDF350 Image
Stock Number: EQC003202
Make: FrostFighter
Model: IDF350
Year: 2015
2015 FrostFighter IDF350 Details
 
Terex Rough Terrain Scissor Lifts Arlington

Terex Rough Terrain Scissor Lifts Arlington

It is really essential to utilize extra care when using a rough terrain scissor lift. Operators must be fully aware of the surrounding environment. Extended booms on the machinery act as levers from the center of the drive unit. For instance, a 6 inch bump could cause a 3 foot bounce when the operator is at the driver controls. Take into consideration all other traffic in the vicinity, as they might not know that you are moving. Plan your assent carefully. Park the boom lift on a flat surface that has no water or mud. These areas cover deep potholes that could be possibly cause the occupants to fall if the tires fell into the holes. If provided, use all of the outriggers, extended to their full extension position. Be sure to only use approved wooden chalk blocks.



A lot of lifts work from a metal platform on the end of the boom. The long booms act as levers from the center of the drive unit. A 6-inch bump could result in a 3-foot bounce while you are at the driver controls. Be aware of all other traffic. They might not know that you are moving. Plan your assent. Park the boom lift on a flat surface free of any water or mud. These areas can cover deep potholes in which the lift tires can fall, tipping the occupants. Extend all outriggers, if provided, completely. Place just approved wooden chalk blocks under the outrigger pads in order to prevent the unit from moving.



A serious hazard for lift drivers is overhead power lines. This is due regardless of what type of lift is utilized. For instance, if the platform operator is not being aware, or if the platform is being controlled by ground employees which could not correctly access proximity to wiring and therefore, either the platform itself or the worker can be easily brought into contact with electrical wires. The worker might be electrocuted unfortunately unless correctly insulated.

  • MEC Scissor Lifts Arlington
    Safety Requirements for Scissor Lifts Scissor lift machinery are known as "moveable scaffolds," according to the OSHA. These industrial machines are capable of lifting heavy and large loads that are balanced well. They are responsible... More
  • Doosan Dual Fuel Forklifts Arlington
    Basic Training Information for LPG Liquid petroleum gas or LPG is a odorless and colorless fuel derived from natural gas. LPG consists of 90% propane. It is extracted in a process referred to as distilling.... More
  • Mitsubishi Counterbalance Forklifts Arlington
    Unfortunately, industrial accidents and injuries at construction sites are extremely common and occur more often than anybody would prefer. According to statistics, a huge majority of these mishaps occur because of inadequate or wholly absent... More
  • Terex Reach Stackers Arlington
    The Reach Stackers made by Terex are economical in operation. These units have been meticulously designed and engineered to suit the needs of a diverse customer base. The Reach Stacker range is more flexible than... More
  • Wolff Tower Cranes Arlington
    During 1861, the company Harland and Wolff was formed. Mr. Gustav Wilhelm Wolff, born in Hamburg in 1834, along with Mr. Edward James Harland born during 1831, formed the business. In 1858 Harland, who was... More